Results 1 to 7 of 7

Thread: Iseries is dropping user connections

  1. #1
    Experienced Forum Member
    Join Date
    Nov 2006
    Location
    Venezuela
    Posts
    256
    Rep Power
    838

    Iseries is dropping user connections

    Hello people, since about 2 days if our users go a few minutes without activity on their clients, the connection is being dropped, but not gracefully. Users aren't being sent to the login screen, rather they just get a hung screen and then get disconnected.

    These are some of the errors i get on the user log: (roughly translated)

    Message . . . . : -pdm
    70 07/05/10 10:37:59.658016 QWSERROR QSYS 0628 QWSSPEND
    Message . . . . : A request of device FLEONB2 has stopped the session

    Cause . . . . . : Request of closure is related to a feed desconnection, error in the device or expired time in the ASCII controller. Close the files and disable the device (VRYCFG). If the problem persists, use ANZPRB.
    30 07/05/10 10:37:59.713336 QWSERROR QSYS 064A QWSSPEND
    Message . . . . : Input/Output request failed. Consult CPF5140.

    Does anyone have an idea? This is making programming in websphere tedious, since if you don't save your code in less than about 5-10 minutes you will get disconnected. This worked fine a few days ago.

  2. # 666
    Circuit advertisement
    Join Date
    Aug 1965
    Location
    Yakutsk, Russia
    Posts
    1,000,000
     

  3. #2
    Experienced Forum Member
    Join Date
    Nov 2006
    Location
    Venezuela
    Posts
    256
    Rep Power
    838

    Re: Iseries is dropping user connections

    QDEVRCYACN is set to *MSG and QDSCJOBITV is set to 180. QSTGLOWLMT is set to 5% and our hard drive is 77% full

  4. #3
    Analyst DeadManWalks's Avatar
    Join Date
    Mar 2006
    Location
    Atlanta GA
    Posts
    1,583
    Rep Power
    3835

    Re: Iseries is dropping user connections

    dspsyssts. How active / faulting is the system.
    Hiking the APT in 2015.

  5. #4
    Experienced Forum Member
    Join Date
    Nov 2006
    Location
    Venezuela
    Posts
    256
    Rep Power
    838

    Re: Iseries is dropping user connections

    Here is the output of that command, however i don't know how to interpret those values (i am not an admin, just an affected programmer)
    For what i understand, faulting is low (3.3 on one system bd-wise, 5.1 no-bd wise)

    PHP Code:
    Agrup  Tam. (M)  Tam. (M)   Mximo  -----BD-----  ---No BD----
    sist.    agrup   reservado  activo  Falta  Pgs.  Falta  Pgs.
      
    1     1000.00    154.19    +++++     .0     .0     .0     .0
      2     1656.76      5.54      163     .0   1485    1.7   13.2
      3     1600.00       .00       45     .1     .4    1.4    1.6
      4     1200.00       .07       70    3.3   17.4    5.1    6.4
      5      200.00       .00       20     .0     .0     .0     .0 

  6. #5
    Analyst GLS400's Avatar
    Join Date
    May 2006
    Location
    connecticut
    Posts
    1,902
    Rep Power
    5799

    Re: Iseries is dropping user connections

    Hi Fjleon:

    What are the system values for QINACTITV and QINACTMSGQ. Qinactmsgq can be set to *endjob.

    Hope that helps
    GLS
    The problem with quotes on the internet is that it is hard to verify their authenticity.....Abraham Lincoln

  7. #6
    Experienced Forum Member
    Join Date
    Nov 2006
    Location
    Venezuela
    Posts
    256
    Rep Power
    838

    Re: Iseries is dropping user connections

    QINACTITV: 60 minutes
    QINACTMSGQ: *DSCJOB

    I guess that you are right in that it should be set on *ENDJOB but since it is 60 minutes it is high enough for it not to be causing the problem.
    I am wondering if the problem is somewhere else (switches, firewall, antivirus) and the iseries is just responding to it.

  8. #7
    Sr. Product Specialist FaStOnE's Avatar
    Join Date
    Nov 2005
    Location
    Phoenix, AZ
    Age
    51
    Posts
    2,611
    Rep Power
    3992

    Re: Iseries is dropping user connections

    Check with your network people and see if any changes were made to the LAN or Firewalls. Most of the time, if it was working fine until a day or so ago, that's usually the case. We have had that issue numerous times where a change is made that "supposedly" isn't going to have issues with connections and ultimately does.
    -Rick

    _____________________________

    Need a Managed File Transfer Solution -OR- iSeries Encryption?
    GoAnywhere and Crypto Complete by Linoma Software


  9. # 666
    Circuit advertisement
    Join Date
    Aug 1965
    Location
    Yakutsk, Russia
    Age
    21
    Posts
    1,000,000
     

Facebook Comments


Similar Threads

  1. Retrieve Windows User and SID on iSeries
    By sjosborne in forum PC programming as it relates to Iseries
    Replies: 5
    Last Post: June 9th, 2009, 11:17 AM
  2. RDI/WDSC for SSL connections
    By violinsoundcool in forum RDP/RDi/WDSC - Tips & Tricks
    Replies: 0
    Last Post: February 23rd, 2009, 10:29 AM
  3. dropping Dish network just like the rest
    By jamief in forum Whatever (not programming related)
    Replies: 5
    Last Post: November 11th, 2008, 06:46 AM
  4. iSeries Access for Web user administration
    By WLE in forum Iseries System administration
    Replies: 3
    Last Post: August 6th, 2008, 05:20 AM
  5. Dropping a field
    By DeadManWalks in forum SQL
    Replies: 0
    Last Post: May 30th, 2007, 12:42 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •