ibmi-brunch-learn

Announcement

Collapse
No announcement yet.

Operation Console-Qconsole

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Operation Console-Qconsole

    Here is my issue. When i connect to the operations console, it connects to qconsole. If another user try's to connect to operations console. It also try's to also connect to qconsole. I have to reset the password for them to connect and use operations console. Anyway to connect to more that one Qconsole at the same time

  • #2
    Re: Operation Console-Qconsole

    Not sure what version of OS you are on, but found this on V5R1 it says:
    AS/400 Operations Console
    The AS/400 Operations Console (hereafter referred to as Operations Console)
    allows a personal computer (PC) to become a local or remote console to your
    iSeries server. This eliminates the need for a twinaxial connection and allows a
    system administrator to watch the system from another location.
    Operations Console has been enhanced to enable connections or console activities
    across a local area network (LAN), besides enabling directly cabled and dial-in
    (modem) connections. A single PC can have multiple connections to multiple
    iSeries servers and can be the console for multiple iSeries servers. An example
    would be a logically partitioned server using the same PC as the console for all
    partitions. Since each partition is considered a separate iSeries server, you need a
    separate connection to the partition for which you want to be the console.
    Operations Console allows multiple connections to a single iSeries server, but only
    one PC can have control of an iSeries server at a time.
    All my answers were extracted from the "Big Dummy's Guide to the As400"
    and I take no responsibility for any of them.

    www.code400.com

    Comment

    Working...
    X