Here is my issue. When i connect to the operations console, it connects to qconsole. If another user try's to connect to operations console. It also try's to also connect to qconsole. I have to reset the password for them to connect and use operations console. Anyway to connect to more that one Qconsole at the same time
Announcement
Collapse
No announcement yet.
Operation Console-Qconsole
Collapse
X
-
Re: Operation Console-Qconsole
Not sure what version of OS you are on, but found this on V5R1 it says:
AS/400 Operations Console
The AS/400 Operations Console (hereafter referred to as Operations Console)
allows a personal computer (PC) to become a local or remote console to your
iSeries server. This eliminates the need for a twinaxial connection and allows a
system administrator to watch the system from another location.
Operations Console has been enhanced to enable connections or console activities
across a local area network (LAN), besides enabling directly cabled and dial-in
(modem) connections. A single PC can have multiple connections to multiple
iSeries servers and can be the console for multiple iSeries servers. An example
would be a logically partitioned server using the same PC as the console for all
partitions. Since each partition is considered a separate iSeries server, you need a
separate connection to the partition for which you want to be the console.
Operations Console allows multiple connections to a single iSeries server, but only
one PC can have control of an iSeries server at a time.All my answers were extracted from the "Big Dummy's Guide to the As400"
and I take no responsibility for any of them.
www.code400.com
Comment